Skip to main content
2026 Ultimate Cost Guide

How much does internal lighting cost to install?

Tom Ellis By Tom Ellis
Updated October 2026
Modern kitchen with layered lighting including downlights, pendants, and LED strips

Lighting is the most powerful tool in interior design. A well-planned lighting scheme can make a small room feel expansive, highlight architectural features, and completely change the mood of a space at the flick of a switch.

But electrical work can be disruptive. The cost of upgrading your lights isn't just about the fittings you choose; it's about the labour required to lift floorboards, run new cables, and patch plasterwork. This 2026 guide breaks down the true cost of transforming your home's lighting.

Prices move month to month. See how they are changing in the Penguin Index, or compare common jobs across the UK in our UK Home Improvement Cost Report.

Like-for-Like Swap

£50 - £100

Labour only cost to swap a single existing pendant light or wall sconce for a new fitting you supply.

Most Common
Downlights (6 Pack)

£350 - £500

Supplied and fitted estimate to replace a single central pendant with 6 flush LED spotlights.

Full Room Rewire

£500 - £900+

Creating a multi-zone smart lighting scheme from scratch, requiring lifting floors and plastering chases.

Get an instant estimate for your room

Design & Types

The 6 Layers of Lighting

The secret to a beautifully lit room is combining 'ambient' (general) light with 'task' and 'accent' lighting. Here are the main styles you will need.

Three stylish pendant lights hanging over a kitchen island

Pendant Lights

Hanging fixtures that act as focal points. Perfect for suspending over kitchen islands or dining tables to create intimate, low-level task lighting.

Feature Light
Flush LED spotlights in a white ceiling

LED Downlights (Spotlights)

Recessed directly into the plasterboard. They provide even, brilliant ambient light across the whole room without cluttering the ceiling line.

Ambient Layer
Brass wall sconce illuminating a hallway

Wall Sconces

Fixed directly to the wall, casting light upwards or downwards. Excellent for hallways or flanking a bed, creating a softer mood than overhead lights.

Accent Light
Hidden LED strip lighting glowing under kitchen cabinets

LED Strip / Cove Lighting

Continuous strips of LEDs hidden behind pelmets, under kitchen cabinets, or within dropped ceilings to create a seamless, glowing wash of light.

Modern Accent
Large crystal chandelier hanging in a tall hallway

Chandeliers

Heavy, ornate statement pieces. Because of their weight, installing a chandelier often requires lifting floorboards above to reinforce the ceiling joists.

Statement Piece
Smartphone app controlling colour-changing smart lights in a living room

Smart Lighting Systems

WiFi or Zigbee-enabled bulbs (like Philips Hue) or hardwired smart switches that allow you to change colours, dim, and set schedules via your phone.

High Tech

Installation & Labour Costs

The actual light fitting is only half the cost. The price depends heavily on whether you are using existing wiring or if the electrician has to run new cables. Here are the 2026 benchmark averages.

Fitting Labour (You Supply the Light)

Rates for an electrician to physically install fixtures, assuming the wiring is already in place:

  • Standard Pendant Swap £50 – £100
  • Wall Sconce Replacement £50 – £90
  • Chandelier (Requiring Reinforcement) £150 – £300
  • LED Strip Fitting (per 5m run) £50 – £100
  • Changing a Light Switch to a Dimmer £40 – £75

Complete Job Estimates

These estimates include the electrician supplying standard white fittings and the labour required to run the cables:

  • 1x LED Downlight (Supplied & Fitted) £50 – £80 per light
  • 6x LED Downlights (Typical Room) £350 – £500
  • Under-Cabinet Kitchen LEDs (3m) £150 – £250
  • Adding a New Wall Light Circuit (2 lights) £250 – £450
  • Complete Lighting Rewire (Standard Room) £400 – £800+
£

Electrician Day Rates: If you are planning multiple lighting upgrades, it is far cheaper to hire an electrician for the day. In 2026, a certified UK electrician typically charges £250 to £350 per day (£45 to £75 per hour).

The Golden Rules of Safe Lighting

Electrical fires and shocks are a serious risk. Never attempt complex electrical work without understanding these UK safety regulations:

Bathroom IP Zones

You cannot put a standard living room light in a bathroom. Bathrooms are divided into wet 'Zones'. Lights above a shower (Zone 1) must be low voltage and rated at least IP65 (jet-proof). General bathroom lights (Zone 2) must be at least IP44 (splash-proof).

Part P Building Regs

Swapping a pendant for another pendant is fine for a DIYer. However, running a brand new lighting circuit, installing lights in a bathroom, or moving the consumer unit is 'notifiable work'. It must be completed or signed off by a Part P registered electrician.

Fire-Rated Downlights

When you cut a hole in a ceiling to install a downlight, you compromise the room's fire barrier. By law, any downlights fitted under a lived-in room (e.g., a kitchen beneath a bedroom) must be Fire-Rated. They contain intumescent materials that expand to seal the hole in a fire.

Location Factors

Regional Labour Differences

The light fittings cost the same whether you live in Cornwall or Cumbria, but the electrician's hourly rate varies dramatically based on your postcode.

Electricians in London and the South East typically charge 20% to 30% more than the national average. A simple £80 job in Wales or the North will likely cost between £100 and £120 in the capital due to increased living and travel costs.

  • London & South East + 20% to 30%
  • Midlands & South West National Average
  • North, Wales & Scotland - 10% to 15%

Top Cost-Saving Tips

Keep your electrician's quotation as low as possible by understanding what takes up their time:

  • ✓ Clear the room: Time is money. If the electrician has to spend 30 minutes moving your sofa and rolling up rugs to lift the floorboards, you are paying them £30+ just to shift furniture.
  • ✓ Batch your jobs: Do not call a sparky out to change one light. Wait until you need a few lights changed, a new socket added, and a dimmer installed, then pay for a single half-day rate.
  • ✓ Avoid plastering: If you want new wall lights, the electrician has to 'chase' (cut) channels into the plaster to hide the wires. You will then have to pay a plasterer to fix the wall, and a decorator to paint it.
Project Timeline

How Long Does It Take to Install Internal Lighting?

Converting a standard lounge or kitchen to modern LED downlights typically takes 1 to 2 days. Below is a detailed breakdown of the installation process, project sizes, and factors that can impact the timeframe.

Schedule of Works (Single Room Downlight Conversion)

Day 1: Morning

Preparation & Marking Out

The electrician safely isolates the power. They use a stud finder to map out the ceiling joists and meticulously mark the layout for the new downlights to ensure perfect symmetry and avoid structural timber. Carpets and floorboards in the room above may be lifted for access.

Day 1: Afternoon

First Fix (Cable Routing)

Using a hole saw, the cut-outs for the downlights are drilled into the ceiling. The electrician routes the new twin and earth cables through the ceiling void, daisy-chaining them between the holes and running a switch wire down the wall to the light switch.

Day 2: Morning

Second Fix (Fitting & Testing)

The new light fittings are wired in, and the spring-loaded downlights are pushed flush into the ceiling. The new dimmer or toggle switch is wired on the wall. The power is restored, and live testing is carried out to ensure the circuit is safe and fully operational.

Day 2: Afternoon

Making Good

Any floorboards lifted in the room above are screwed back down, and carpets are re-laid. If the old central pendant light was removed, the electrician or a plasterer will patch the old hole in the ceiling with plasterboard and filler, leaving it ready for decorating.

Timeline by Project Size

Simple Fixture Swap Replacing an existing pendant or wall light
1 - 2 Hours
Single Room Downlights Routing new cables and drilling cut-outs
1 - 2 Days
Whole House / Smart Lighting Extensive rewiring and smart integration
3 - 5 Days

What could cause delays?

Access to the Ceiling Void

If the room above has glued laminate flooring, solid wood, or tiles, the electrician cannot lift floorboards to route cables. This requires cutting multiple messy access channels into the ceiling below.

Consumer Unit Upgrades

If your current fuse box is outdated and lacks RCD protection, the electrician must upgrade the board or install an RCBO before signing off the new lighting to meet modern safety regulations.

Lath and Plaster Ceilings

Older properties often have lath and plaster ceilings instead of modern plasterboard. These are extremely messy and prone to crumbling when drilled, meaning extra time and care are required to prevent severe damage.

Cost-Saving Option

What Internal Lighting Can You Do Yourself?

Under UK Building Regulations (Part P), it is illegal for a non-qualified person to install a brand new electrical circuit or work in "special locations" like zones in a bathroom. However, there are plenty of lighting upgrades you can legally and safely do yourself, eliminating an electrician's £60-£90 hourly call-out charge.

You are legally permitted to replace existing light fittings (like swapping a basic pendant for a new chandelier) and change switch faceplates on a like-for-like basis. Additionally, installing "plug-and-play" LED strip lights under kitchen cabinets or smart bulbs (like Philips Hue) requires zero hardwiring and transforms a room instantly.

Changing a Ceiling Light Fitting Professional Labour Cost £60 – £120 DIY Cost £0 (Just your time) Potential Saving Up to £120
Swapping Switch Faceplates Professional Labour Cost £40 – £80 (Per switch) DIY Cost £0 (Just your time) Potential Saving Up to £80
Under-Cabinet LED Strips (Plug-in) Professional Labour Cost £150 – £250 (If hardwired) DIY Cost £30 – £60 (Kit cost) Potential Saving Up to £190
Adding a New Lighting Circuit Professional Labour Cost £300 – £500+ DIY Cost Illegal / Unsafe Potential Saving N/A
A British homeowner changing a ceiling light fitting in their kitchen
Safety Warning: Before changing a light fitting or a switch faceplate, you must isolate the power at the main consumer unit (fuse box)—do not just flick the wall switch off. Use a voltage testing pen to double-check that the wires are completely dead before you touch them.
Information

Frequently Asked Questions

The most important things you need to know before booking an electrician for interior lighting.

How much does it cost to install LED downlights in a ceiling in the UK?

For a standard room, replacing a single central ceiling pendant with 6 fire-rated LED downlights typically costs between £350 and £500 fully installed. The price per downlight (supplied and fitted by a qualified electrician) averages £50 to £80, depending heavily on floorboard access and the complexity of routing new cables above the ceiling.

How much does a UK electrician charge to change a light fitting?

If you supply the light fitting, a local electrician will usually charge between £50 and £100 for labour to safely swap a standard pendant or flush ceiling mount. For heavy crystal chandeliers requiring ceiling joist reinforcement or installations over high stairwells requiring scaffolding, expect to pay £150 to £300 in electrical labour.

Do I legally need an electrician to change a light fitting?

By UK law, a competent DIYer is permitted to change a 'like-for-like' light fitting in a standard dry room (such as a living room or bedroom). However, installing brand new lighting circuits, adding wall switches, or doing any electrical work in a bathroom 'special location' must be completed or certified by a Part P registered professional.

Can I put a dimmer switch on any LED light?

No. If you want to use a dimmer switch with modern energy-efficient LED lighting, you must ensure that both the specific bulbs and the internal LED driver are explicitly marked as 'Dimmable'. Furthermore, the wall switch itself must be upgraded to a 'Trailing Edge' dimmer module designed specifically to handle the low wattage of LEDs without flickering or buzzing.

Why does fitting new hardwired wall lights cost so much?

If you don't already have existing electrical wiring in the wall, the electrician must 'chase' (cut) a channel into your brickwork or plaster to hide the new mains cables. This creates significant dust, takes extra time, and means you will subsequently need to pay a plasterer to patch and skim the wall before you can decorate.

What is the difference between GU10 and Integrated LED downlights?

GU10 downlights hold a standard replaceable spotlight bulb; if the bulb blows, you can swap it yourself for £3. Integrated LED downlights have the light chip permanently built into the sealed fire-rated fitting. They look sleeker and last much longer (often 30,000+ hours), but if they eventually fail, an electrician must replace the entire unit.

What are UK bathroom lighting zones and IP ratings?

UK wiring regulations divide bathrooms into strict safety zones based on proximity to water. Any light fitting installed directly above a shower cubicle or bath (Zone 1) must have a minimum ingress protection rating of IP65 (highly water-resistant) and must be protected by an RCD to prevent fatal electric shocks in wet conditions.

Can an electrician install hardwired smart lighting systems?

Yes. While basic smart bulbs simply screw into existing sockets, a professional electrician is required if you want to install hardwired smart dimmer switches, integrated smart downlights, or in-wall micro relays (like Lightwave or Shelly) behind your existing light switches for seamless, professional whole-house automation without losing manual switch control.

Disclaimer: The figures in this guide are carefully calculated averages derived from UK electrical industry cost data for 2026. Material prices and labour rates will fluctuate based on local availability, property age, and exact project specifications.

Ready to illuminate your home?

Use our AI to get a precise estimate for your lighting upgrades, then connect with Pricing Penguin Accredited electricians near you.

Feedback

Did you find this page helpful?

Let us know if this guide helped you plan your lighting project.