Skip to main content
2026 Ultimate Cost Guide

How much does chimney removal cost?

Tom Ellis By Tom Ellis
Updated October 2026
Partially removed brick chimney breast in a living room during renovation

In older UK properties, bulky chimney breasts take up massive amounts of valuable floor space in living rooms and bedrooms. While removing them completely transforms the layout, it is never a simple demolition job. A chimney is a core structural pillar of your house, supporting tonnes of masonry.

If you remove the bottom section, the unsupported brickwork above it will collapse. You must install heavy steel beams or gallows brackets to hold the remaining chimney up, or remove the entire stack straight through the roof. This comprehensive 2026 guide breaks down the true cost of structural supports, builder labour, and making good the massive holes left behind.

Prices move month to month. See how they are changing in the Penguin Index, or compare common jobs across the UK in our UK Home Improvement Cost Report.

External Stack Only

£800 - £1,800

Taking down the external chimney stack to the roofline and patching the roof with matching tiles.

Most Common
Single Room Breast

£1,500 - £2,500

Removing the breast in one room only, requiring a steel beam (RSJ) to support the stack above.

Complete Removal

£3,000 - £6,000+

Demolishing the chimney from the ground floor, through the bedrooms, loft, and right off the roof.

Get an instant estimate for your chimney

Scope of Work

The Three Levels of Removal

You rarely have to remove the entire chimney structure. The cost depends entirely on which sections you want gone, and how you support the parts left behind.

Exposed brick wall showing a partially removed chimney breast

Internal Breast Only

You remove the protruding breast in the living room to gain floor space. Because the chimney in the bedroom and loft above is still there, you must install heavy structural supports beneath the ceiling to stop the upstairs chimney crashing down.

£1,500 – £2,500 (1 Floor)
Scaffolding around a roof while builders remove an external chimney stack

External Roof Stack Only

Often done when an old chimney is causing severe damp and leaking into the loft. The builder scaffolds the roof, knocks the brickwork down to below the roofline, and tiles over the hole. The internal chimney breasts remain intact inside the house.

£800 – £1,800 (Stack Only)
!

Complete Removal

The entire structure is demolished. The roof stack, loft chimney, bedroom breast, and living room breast are all knocked down. This removes the need for structural steel beams, but the demolition labour, scaffolding, and skip hire costs are massive.

£3,000 – £6,000+ (All Floors)

Supporting the Chimney Above

If you remove a chimney breast downstairs but leave it upstairs, the remaining masonry weighs tonnes. It must be structurally supported. A Structural Engineer will determine which of the two methods below is legal for your specific property.

Rusty steel gallows brackets bolted to a brick wall supporting a chimney

Gallows Brackets

Two heavy-duty L-shaped steel brackets bolted directly into the party wall. A steel plate or concrete lintel is laid across them to hold the chimney up. They are much cheaper and less intrusive to install than beams.

Warning: Many local councils ban gallows brackets if your neighbour has already removed their chimney on the other side of the party wall, as the wall cannot safely support the weight of both brackets.

Cost to Supply & Fit: £400 – £1,000
Large steel RSJ beam spanning across a room to support a chimney breast

Steel RSJ Beam

A heavy steel beam is inserted into the floor joists above the removed chimney. It spans the width of the room, resting on load-bearing walls at either end. This guarantees structural safety regardless of what your neighbour does.

Installing a steel beam is highly disruptive. It requires pulling up floorboards in the room above, cutting channels into the walls, and maneuvering a massive piece of steel into the house.

Cost to Supply & Fit: £800 – £2,500

Complete Cost Breakdown

We have analysed the 2026 UK construction market to create these benchmark averages. The figures below represent the complete average costs to supply labour, structural materials, and waste disposal.

Complete Job Estimates

Average total costs including demolition, structural support, skip hire, and basic plastering to make good the wall.

  • External Roof Stack Only £800 – £1,800
  • Internal Breast Only (1 Floor) £1,500 – £2,500
  • Internal Breast (2 Floors) £2,500 – £4,500
  • Complete Removal (Roof + All Floors) £3,000 – £6,000+
  • Large Multi-Storey Full Removal £6,000 – £10,000+

Professional Fees & Extras

Chimney removal involves legal paperwork and heavy waste disposal. Factor these into your budget if managing the job yourself:

  • Structural Engineer Calculations £350 – £700
  • Building Control Inspection Fee £200 – £500
  • Party Wall Agreement (Surveyor) £700 – £1,500+
  • Builder's Skip Hire (8 Yard) £200 – £400+
  • Scaffolding (For roof stack access) £400 – £900+
The Aftermath

Making Good

When the builder drives away with the rubble, you are left with a gaping hole in your living room and ceiling. The quote for "chimney removal" rarely covers the extensive cosmetic work required to make the room liveable again, which can easily add £150 to £400+ per room. You must budget for:

  • • Flooring: There will be a bare concrete or dirt patch where the hearth sat. You will need to patch the floorboards or lay entirely new carpet/laminate for the whole room.
  • • Skirting Boards: New skirting boards must be cut and fitted across the newly exposed flat wall.
  • • Plastering: The exposed, jagged brickwork must be boarded and skimmed by a plasterer to blend seamlessly with the rest of the wall.
  • • Decorating: Painting the new plaster once it has fully dried.
Freshly plastered wall and new skirting board where a chimney breast used to be

Crucial Structural Warnings

Chimney removal is fraught with legal and structural dangers. Ignore these rules at your peril:

The Party Wall Act

If you live in a terraced or semi-detached house, your chimney is usually connected to your neighbour's. By law, you must serve them a Party Wall Notice 2 months before starting structural work on a shared chimney. If they formally object, you must hire a surveyor to resolve the dispute, which can cost £700 to £1,500+ per neighbour.

Damp & Ventilation

If you remove the breast downstairs but leave the stack on the roof, rain can still enter the open top. Without the heat of a fire drying it out, water will pool inside the remaining chimney cavity, causing severe damp patches to bleed through your upstairs bedroom walls. The remaining stack must be properly capped and ventilated.

Location Factors

Regional Labour Differences

There are very few materials involved in removing a chimney (just the steel beam). The quote is almost entirely driven by the heavy builder labour, skip hire, and structural engineer fees, which vary heavily by location.

Builders in London and the South East typically charge 20% to 40% more than the national average. A single room removal quoting at £1,500 in Wales or the North will easily cost £1,800 to £2,500+ in the capital to cover increased day rates and parking permits for skips.

  • London & South East + 20% to 40%
  • Midlands & South West National Average
  • North, Wales & Scotland - 10% to 15%

Top Cost-Saving Tips

  • ✓ Leave the stack: Removing the roof stack involves expensive scaffolding and roofing labour. If the chimney is structurally sound and not leaking, leave it alone and just remove the internal breast downstairs to gain the floor space you need.
  • ✓ Clear the room yourself: Builders charge for their time. The only safe DIY is prep and clearing the room. Empty the space completely and pull up the carpets before they arrive so they can start structural work immediately.
Project Timeline

How Long Does a Chimney Removal Take?

Removing a chimney breast or stack is a heavy structural job that typically takes between 4 to 7 days for a complete top-to-bottom removal. Below is a detailed breakdown of the demolition process, project scopes, and factors that can impact the timeline.

Schedule of Works (Full Stack & Breast Removal)

Day 1

Setup & Structural Prep

Scaffolding is erected outside if the roof stack is coming down. Inside, the rooms are heavily sealed with plastic sheeting to contain the soot. If it is only a partial removal (e.g., ground floor only), structural steel beams (RSJs) or gallows brackets are installed now to support the masonry above.

Days 2 - 3

The Demolition

The chimney is dismantled brick by brick in a top-down approach. The roof stack is removed first, followed by the breasts in the loft, bedrooms, and finally the ground floor. Tonnes of sooty rubble, old mortar, and flue liners are bagged up and removed to an external skip.

Day 4

Roof & Floor Patching

With the masonry gone, the house needs to be made watertight and safe. Roofers patch the hole left by the stack with matching tiles and felt. Inside, carpenters repair the gaping holes left in the ceiling joists and floorboards between each level.

Days 5 - 7

Plastering & Making Good

The exposed party wall where the chimney used to sit is often covered in black soot stains. This is sealed, dot-and-dabbed with plasterboard, and skimmed flush with the surrounding walls. New skirting boards and coving are fitted to complete the seamless look.

Timeline by Project Scope

Roof Stack Only Taking stack below roofline & tiling over
1 - 2 Days
Single Breast (Partial) Requires steels to support chimney above
2 - 3 Days
Full Top-to-Bottom Stack, loft, bedroom & ground floor
4 - 7 Days

What could cause delays?

Party Wall Agreements

If you share the chimney with a neighbour, you are legally required to serve a Party Wall Notice. If they dispute it or demand a surveyor, this can delay the project start date by weeks or even months.

Building Control Inspections

Partial removals require a structural engineer's design for steel beams or brackets. The local Building Control officer must physically visit to inspect and sign off these supports before you can plaster over them.

Hidden Hazards & Asbestos

Old chimneys are incredibly filthy. Cleaning up decades of highly corrosive soot, or discovering old asbestos cement flue liners that require specialist removal, will temporarily halt demolition.

Cost-Saving Options

What Chimney Work Can You Do Yourself?

Removing a chimney breast is major structural engineering. If you smash out the bricks in your living room, the tonnes of masonry in the bedroom and loft above will literally collapse onto your head. Completely removing a chimney or supporting the remaining stack with steel beams (RSJs or gallows brackets) requires a structural engineer and Building Control sign-off. You must leave this structural phase to professional builders.

However, chimney removals are incredibly messy, and builders charge premium rates for basic demolition. You can save hundreds of pounds by doing the "strip-out" phase yourself. Dismantling the old decorative fireplace surround, smashing up the concrete hearth, and hacking the plaster off the chimney breast back to the bare brickwork will save a builder a full day of expensive labour.

Removing the Fireplace Surround & Hearth Professional Cost £150 – £250 DIY Cost £0 (Just your time) Potential Saving Up to £250
Hacking off Plaster back to Brick Professional Cost £200 – £300 DIY Cost £20 – £40 (Skip space) Potential Saving Up to £280
Painting & Decorating the New Flat Wall Professional Cost £150 – £250 DIY Cost £30 – £50 (Paint/Supplies) Potential Saving Up to £200
Structural Brick Removal & Steel Installation Professional Cost £1,500 – £2,500+ DIY Cost Illegal / Lethal Potential Saving N/A
Homeowner wearing safety goggles using a lump hammer and bolster chisel to remove an old tiled fireplace hearth
Structural Collapse Warning: Never remove a single course of bricks from the actual chimney breast pillar unless the masonry above it is fully supported by steel beams approved by a structural engineer, or the entire stack has been dismantled from the roof downwards. Removing a ground floor breast unsupported is a guaranteed structural collapse that will destroy your home, potentially cause fatalities, and instantly void your home insurance.
Information

Frequently Asked Questions

The most important things you need to know before booking a builder for chimney removal.

How much does it cost to remove a chimney breast in one room in the UK?

Removing a chimney breast from a single ground-floor room typically costs between £1,500 and £2,500. This includes structural steel beam support (or gallows brackets) for the remaining masonry above, commercial waste removal, and basic plastering to make good the wall.

How much does it cost to remove a full chimney stack from the roof?

Removing the external chimney stack right down to the roofline costs roughly £800 to £1,800. This covers the necessary scaffolding, safely dismantling the heavy brickwork, and patching the roof with matching timber, felt, and tiles to make it completely watertight.

Do I need planning permission to remove a chimney stack?

Usually, no. Removing an internal breast or external stack is typically classed as UK Permitted Development. However, if you live in a designated conservation area or a Grade-listed building, you will absolutely need formal planning consent before altering the exterior roofline.

Do I need Building Regulations approval to remove a chimney?

Yes, unconditionally. Because removing a chimney breast involves major structural alterations, Building Regulations approval is legally required. A local Building Control officer must inspect the structural steelwork or gallows brackets to ensure the remaining chimney above is safely supported.

Can I remove a chimney breast myself as a DIY project?

Absolutely not. A standard brick chimney breast holds tonnes of weight. If you remove the bottom section without correctly supporting the masonry above it, the entire brick stack can collapse through the floors of your house, causing catastrophic, life-threatening structural failure.

Do I need to tell my neighbour if I remove a chimney?

Yes, if you share a party wall. Under the Party Wall Act 1996, you must serve your neighbours a written Party Wall Notice two months before starting structural work on a shared chimney. If they formally object, you must hire a party wall surveyor to resolve the dispute.

Do I need to hire a structural engineer to remove a chimney?

Yes, a structural engineer is essential for both partial breast and full chimney removal. You should budget roughly £250 to £700 for the engineer's site visit, load calculations, and structural support drawings. These calculations are what keeps the structure safe and satisfies Building Control.

Can I use gallows brackets instead of a steel RSJ beam?

It depends on your local council and the wall's condition. Gallows brackets are cheaper than a steel RSJ beam, but many UK local authorities now ban them for chimney support if the party wall is not thick enough (usually requiring a minimum 225mm solid brick wall) or if the neighbour has already removed their side.

Disclaimer: The figures in this guide are carefully calculated averages derived from UK construction industry cost data for 2026. Material prices and labour rates will fluctuate based on local availability, structural complexity, and exact project scope.

Ready to gain some space?

Use our AI to get a precise estimate based on your structural needs, then connect with Pricing Penguin Accredited builders and structural engineers near you.

Feedback

Did you find this page helpful?

Let us know if this guide helped you plan your chimney removal project.